on PlugchoiceA parking lot of Peblar Duals, load-balanced on one connection.
The Dual puts two charge points on a single feed. Plugchoice runs the whole row: balanced live, metered per socket, billed clean.
Peblar reveals the Dual on 23 June 2026. Specs here are pre-reveal, from Peblar's own pages.
Two cars, one connection. Never enough power.
Line a car park with Duals and the sockets fight over one feed. That is the job Plugchoice was built to do.
Sockets pull blind on a shared feed. The main trips at the evening peak.
Dynamic load balancing holds every socket inside the grid limit, live and per phase.
Run control wiring from the meter to each charger.
Read building load wirelessly over P1, CT clamps or Modbus.
Charge at a flat rate, whenever a car plugs in.
Push sessions to off-peak hours or surplus solar with tariff rules.
Read each meter by hand for reimbursement.
MID and Eichrecht kWh recorded per socket, per session.
The whole site is locked to one backoffice.
OCPP Proxy runs the row on your existing backend too. No lock-in.
A separate platform for every charger brand.
One backoffice for 1,000+ charger integrations and 220+ operators.
Free to connect. No per-socket fees, no lock-in.
Where the Dual earns its keep
Anywhere demand outruns the grid connection: shared parking, more sockets per feed, every kWh accounted for.
Apartments and residential parking
Residents share one building connection. Per-socket metering bills each car on its own, and overnight balancing keeps the basement inside the main fuse.
Workplace and fleet car parks
Dozens of sockets, one daytime peak. Plugchoice spreads power across every Dual so nobody trips the main, and shifts charging to solar or cheap hours.
Retail, hospitality and semi-public
The Dual takes a contactless tap or QR payment, no app needed. Plugchoice handles tariffs, sessions and billing-grade kWh for reimbursement.
Cascaded metering, done right
Daisy-chain a row of Duals off one connection and you do not lose track of a kWh. Each socket carries its own MID and Eichrecht meter, so Plugchoice records billing-grade energy per session, all the way back to the main feed.
On top of the metering sits the balancing. Plugchoice reads the building's live load wirelessly and keeps every socket inside the grid limit per phase. No control wiring, no tripped main at the evening peak.
We run the whole site from one backoffice.
from a single grid connection, shared live
daisy-chained to a full row of sockets
metered MID and Eichrecht, per socket
What the Dual brings
Confirmed from Peblar's own pages. Every Peblar speaks OCPP 1.6J and runs on Plugchoice, so the Dual connects the same way once it ships.
- 1x22 kW or 2x11 kW, shared from one connection
- Two Type 2 sockets, 1- or 3-phase
- OCPP 1.6J over Ethernet, WiFi 6 or LTE
- MID and Eichrecht energy metering
- Built-in card or QR payment, no app needed
- Daisy-chain cabling, hot-swap maintenance
Peblar Dual is an independent Peblar product. Specifications are taken from Peblar's published pages ahead of the 23 June 2026 reveal and may change; we will confirm hands-on once units ship. Price, dimensions, ratings, protection hardware and OCPP 2.0.1 support are not yet confirmed by Peblar. Peblar and Peblar Dual are trademarks of Peblar B.V.; product images shown here are copyright Peblar B.V. and used for identification and editorial purposes only. Plugchoice is not affiliated with, authorised by, or endorsed by Peblar.
Make that parking lot smart
Connect Peblar to Plugchoice for free and run balancing, metering and billing across the whole row.