on PlugchoiceOne grid connection. A whole parking lot of load-balanced charging.
The Peblar Dual puts two charge points on a single feed. Stack a row of them across a car park and Plugchoice runs the lot: balanced live, metered per socket, billed clean.
Peblar reveals the Dual on 23 June 2026. Specs on this page are pre-reveal, from Peblar's own pages.
Two cars. One connection. Never enough power. That is exactly the spot the Dual is built for.
Most twin chargers chase 2x22 kW and need a fat feed to match. The Peblar Dual goes the other way: one grid connection, two Type 2 sockets, 1x22 kW or 2x11 kW shared dynamically. Line a car park with them and you get a lot of sockets fighting over one feed. That is the problem Plugchoice was built to solve.
The same row of Duals, before and after Plugchoice.
Where the Dual earns its keep
Anywhere demand outruns the grid connection: shared parking, more sockets per feed, every kWh accounted for.
Apartments and residential parking
Residents share one building connection. Cascaded metering bills each socket on its own, and overnight balancing keeps the whole basement inside the main fuse.
Workplace and fleet car parks
Dozens of sockets, one daytime peak. Plugchoice spreads available power across every Dual so nobody trips the main, and shifts charging to solar or cheap hours.
Retail, hospitality and semi-public
The Dual takes a contactless tap or QR payment with no app or account. Plugchoice handles tariffs, sessions and billing-grade kWh for reimbursement and reporting.
Cascaded metering, done right
Daisy-chain a row of Duals off one connection and you do not lose track of a single kWh. Each socket carries its own MID and Eichrecht meter, so Plugchoice records billing-grade energy per session, per socket, all the way back to the main feed.
On top of the metering sits the balancing. Plugchoice reads the building's live load wirelessly (P1, CT clamps or Modbus) and keeps every socket inside the grid limit per phase. No control wiring between meter and charger, no tripped main at the evening peak.
We make the whole site smart from one backoffice.
Think bigger than two sockets
The Dual is a building block. Plugchoice is what turns a wall of them into one managed, metered, money-making site.
from a single grid connection, shared live
daisy-chained to a full row of sockets
metered MID and Eichrecht, per socket
What the Dual brings
Confirmed from Peblar's own pages ahead of the 23 June 2026 reveal. Every Peblar already speaks OCPP 1.6J and runs on Plugchoice, so the Dual connects the same way, with no special driver, once it ships.
- 1x22 kW or 2x11 kW, shared from one connection
- Two Type 2 sockets, 1- or 3-phase
- OCPP 1.6J over Ethernet, WiFi 6 or LTE
- MID and Eichrecht energy metering
- Built-in card or QR payment, no app needed
- Daisy-chain cabling, hot-swap maintenance
Peblar Dual is an independent Peblar product. Specifications are taken from Peblar's published pages ahead of the 23 June 2026 reveal and may change; we will confirm hands-on once units ship. Price, dimensions, ratings, protection hardware and OCPP 2.0.1 support are not yet confirmed by Peblar. Peblar and Peblar Dual are trademarks of Peblar B.V.; product images shown here are copyright Peblar B.V. and used for identification and editorial purposes only. Plugchoice is not affiliated with, authorised by, or endorsed by Peblar.
Make that parking lot smart
Connect Peblar to Plugchoice for free and run balancing, metering and billing across the whole row.